Essential High School Geometry Guide

Essential High School Geometry Guide | Generated by AI

Home 2026.02

Question: Provide a comprehensive guide to high school geometry covering these topics: 1. Points, Lines, and Planes; 2. Angles (types, relationships); 3. Parallel and Perpendicular Lines; 4. Triangles (types, properties, angle sum); 5. Congruent Triangles (postulates, theorems); 6. Similar Triangles (properties, ratios); 7. Pythagorean Theorem; 8. Special Right Triangles (30-60-90, 45-45-90); 9. Quadrilaterals (types, properties); 10. Polygons (properties, angle sums); 11. Circles (parts, properties, circumference, area); 12. Area of Triangles and Quadrilaterals; 13. Volume of Solids (prisms, cylinders, pyramids, cones, spheres); 14. Coordinate Geometry (distance, midpoint, slope); 15. Transformations (translation, reflection, rotation, dilation); 16. Trigonometry (right triangle ratios: sine, cosine, tangent); 17. Angles of Elevation and Depression; 18. Unit Circle; 19. Trigonometric Functions (graphs, properties); 20. Law of Sines and Law of Cosines.

Answer:

Here is a structured, comprehensive overview of high school geometry topics. Each section includes key definitions, properties, theorems, and important formulas.

1. Points, Lines, and Planes

Point: A location with no size (denoted by capital letter, e.g., A).
Line: Straight path extending infinitely in both directions (denoted by ←→ or two points, e.g., AB).
Plane: Flat surface extending infinitely (denoted by a script letter or three non-collinear points).
Postulates:
- Through any two points, there is exactly one line.
- Through any three non-collinear points, there is exactly one plane.
Segments, rays: Segment AB has endpoints A and B; ray AB starts at A and extends through B infinitely.

2. Angles (Types, Relationships)

Angle: Formed by two rays with a common endpoint (vertex).
Types:
- Acute: < 90°
- Right: = 90°
- Obtuse: > 90° but < 180°
- Straight: = 180°
Relationships:
- Complementary: sum = 90°
- Supplementary: sum = 180°
- Vertical angles: opposite angles formed by intersecting lines → congruent
- Linear pair: adjacent angles forming a straight line → supplementary

3. Parallel and Perpendicular Lines

Parallel lines ( ): Never intersect, same plane.
Perpendicular lines (⊥): Intersect at 90°.
Transversal: Line intersecting two or more lines.
Angle relationships with transversal:
- Corresponding angles: congruent (if parallel)
- Alternate interior angles: congruent (if parallel)
- Alternate exterior angles: congruent (if parallel)
- Consecutive (same-side) interior angles: supplementary (if parallel)
Slope in coordinate plane: Parallel lines have equal slopes; perpendicular lines have negative reciprocal slopes (m₁ × m₂ = -1).

4. Triangles (Types, Properties, Angle Sum)

Angle sum: Interior angles sum to 180°.
Exterior angle: Equals sum of two remote interior angles.
Types:
- By sides: Scalene (all sides different), Isosceles (two sides equal), Equilateral (all sides equal).
- By angles: Acute (all < 90°), Right (one = 90°), Obtuse (one > 90°).

5. Congruent Triangles (Postulates, Theorems)

Definition: Same size and shape (corresponding parts equal).
Postulates/Theorems:
- SSS (Side-Side-Side)
- SAS (Side-Angle-Side, included angle)
- ASA (Angle-Side-Angle, included side)
- AAS (Angle-Angle-Side)
- HL (Hypotenuse-Leg) — only for right triangles
CPCTC: Corresponding Parts of Congruent Triangles are Congruent.

6. Similar Triangles (Properties, Ratios)

Definition: Same shape, possibly different size (corresponding angles equal, sides proportional).
Criteria:
- AA (Angle-Angle)
- SSS Similarity (sides proportional)
- SAS Similarity (two proportional sides and included angle equal)
Properties: Ratios of corresponding sides are equal (scale factor); perimeters proportional; areas proportional to scale factor squared.

7. Pythagorean Theorem

In a right triangle: a² + b² = c² (c = hypotenuse).
Converse: If a² + b² = c², then triangle is right-angled.

8. Special Right Triangles

45-45-90 (isosceles right triangle):
- Legs equal; hypotenuse = leg × √2
- Ratios: 1 : 1 : √2
30-60-90:
- Sides opposite: 30° (shortest), 60°, 90° (hypotenuse)
- Ratios: 1 : √3 : 2 (opposite 30° : opposite 60° : hypotenuse)

9. Quadrilaterals (Types, Properties)

Sum of interior angles: 360°.
Types:
- Parallelogram: Opposite sides parallel and congruent; opposite angles congruent; consecutive angles supplementary; diagonals bisect each other.
- Rectangle: Parallelogram with four right angles; diagonals congruent.
- Rhombus: Parallelogram with four congruent sides; diagonals perpendicular and bisect angles.
- Square: Rectangle + rhombus (all properties).
- Trapezoid: Exactly one pair of parallel sides (bases); isosceles trapezoid has congruent legs and base angles.
- Kite: Two pairs of adjacent congruent sides; diagonals perpendicular (one bisects the other).

10. Polygons (Properties, Angle Sums)

Regular polygon: All sides and angles equal.
Interior angle sum: (n - 2) × 180° (n = number of sides).
One interior angle (regular): [(n - 2) × 180°] / n
Exterior angle sum: Always 360°.
One exterior angle (regular): 360° / n

11. Circles (Parts, Properties, Circumference, Area)

Parts: Center, radius, diameter, chord, secant, tangent, arc, sector, segment.
Properties:
- Radius ⊥ tangent at point of contact.
- Diameter subtends 90° at circumference (semicircle).
- Central angle = measure of arc; inscribed angle = ½ arc measure.
Circumference: C = 2πr or πd
Area: A = πr²

12. Area of Triangles and Quadrilaterals

Triangle: A = (1/2)bh or (1/2)ab sin C
Parallelogram: A = bh
Rectangle: A = lw
Square: A = s²
Trapezoid: A = (1/2) × (b₁ + b₂) × h
Rhombus/Kite: A = (1/2) × d₁ × d₂

13. Volume of Solids

Prism: V = Bh (B = base area)
Cylinder: V = πr²h
Pyramid: V = (1/3)Bh
Cone: V = (1/3)πr²h
Sphere: V = (4/3)πr³

14. Coordinate Geometry

Distance between (x₁,y₁) and (x₂,y₂): d = √[(x₂ - x₁)² + (y₂ - y₁)²]
Midpoint: M = ((x₁ + x₂)/2, (y₁ + y₂)/2)
Slope: m = (y₂ - y₁)/(x₂ - x₁)

15. Transformations

Translation: Slide (x,y) → (x + a, y + b)
Reflection: Flip over line (e.g., x-axis: (x,y) → (x,-y))
Rotation: Turn about point (e.g., 90° counterclockwise about origin: (x,y) → (-y,x))
Dilation: Scale from center by factor k (changes size, preserves shape)

16. Trigonometry (Right Triangle Ratios)

SOH-CAH-TOA:
- sin θ = opposite / hypotenuse
- cos θ = adjacent / hypotenuse
- tan θ = opposite / adjacent

17. Angles of Elevation and Depression

Angle of elevation: Angle from horizontal up to line of sight.
Angle of depression: Angle from horizontal down to line of sight.
Both form right triangles; use trig ratios with same value (alternate interior angles).

18. Unit Circle

Circle centered at origin with radius 1.
Coordinates of point at angle θ (from positive x-axis): (cos θ, sin θ)
Key angles (degrees/radians): 0°, 30°, 45°, 60°, 90°, etc.

19. Trigonometric Functions (Graphs, Properties)

Period: sin/cos = 360° or 2π; tan = 180° or π
Amplitude: 1 for sin/cos (unit circle)
Domain/Restrictions: All real for sin/cos; tan undefined at odd multiples of 90°
Graphs: Sine (wave, starts at 0), Cosine (wave, starts at 1), Tangent (asymptotes)

20. Law of Sines and Law of Cosines

Law of Sines: a/sin A = b/sin B = c/sin C (use for AAS/ASA/SSA ambiguous case)
Law of Cosines: c² = a² + b² - 2ab cos C (generalizes Pythagorean theorem; use for SAS/SSS)

This guide covers the core concepts, theorems, and formulas needed for high school geometry success.

References:

Back Donate