MI300X ROCm Status Report | Generated by AI

Home 2026.05

Here’s the full report:

====================================================================
           COMPREHENSIVE ROCm & GPU STATUS REPORT
====================================================================

SYSTEM

  Hostname:     snapshots-gpu-mi300x1-192gb-devcloud-atl1
  Kernel:       6.8.0-117-generic (Ubuntu 24.04)
  Arch:         x86_64

ROCm STACK

  Version:      7.2.0
  HIP:          7.2.26015 (AMD clang 22.0.0)
  HSA Runtime:  1.18
  ROCk Module:  6.16.13 (loaded)
  Install Path: /opt/rocm-7.2.0 -> /opt/rocm
  Shared Libs:  60 libraries (rocblas, hipfft, rccl, MIOpen, etc.)
  Binaries:     hipcc, rocm-smi, rocminfo, rocgdb, rocprof, hipify-clang, ...

GPU HARDWARE

  Device:       AMD Instinct MI300X VF
  GFX Target:   gfx942 (gfx9-4-generic also supported)
  Chip ID:      0x74b5
  SKU:          M3000100
  Compute Units: 304
  SIMDs/CU:     4
  Shader Engines: 32
  Wavefront:    64
  Max Clock:    2100 MHz
  Fast FP16:    Yes
  SRAMECC:      Enabled
  XNACK:        Disabled

MEMORY

  VRAM Total:   ~192 GB (205,822,885,888 bytes)
  VRAM Used:    ~299 MB (299,687,936 bytes)
  VRAM Free:    ~191.5 GB
  L1 Cache:     32 KB
  L2 Cache:     4 MB
  L3 Cache:     256 MB

THERMAL & POWER

  Junction Temp:    43.0 C
  Memory Temp:      37.0 C
  Current Power:    157.0 W ^[[40;1R      Power Cap:        750.0 W
  Fan:              Not supported (passive/liquid cooling)

CLOCK & PERFORMANCE

  fclk:     1300 MHz
  mclk:     900 MHz
  sclk:     131 MHz (idle)
  socclk:   889 MHz
  Perf Level: auto
  GPU Busy:   0% (idle)

CPU

  Model:        Intel Xeon Platinum 8568Y+
  Compute Units: 20
  L1 Cache:     32 MB
  System RAM:   ~247 GB

ENVIRONMENT

  PATH:         /opt/rocm/bin (added this session + persisted to .bashrc)
  LD_LIBRARY:   /opt/rocm/lib (persisted to .bashrc)
  ROCM_PATH:    Not set
  HIP_PATH:     Not set
  PyTorch:      NOT INSTALLED

STATUS

  GPU:          DETECTED & IDLE
  ROCm:         FULLY INSTALLED
  Tools:        ALL PRESENT (hipcc, rocm-smi, rocminfo, rocgdb, rocprof)
  PATH:         FIXED (added /opt/rocm/bin)
  Missing:      PyTorch/ROCm, ROCM_PATH & HIP_PATH env vars
====================================================================


Key takeaways:
  - ROCm 7.2.0 is fully installed with all dev/debug/profiling tools
  - MI300X (192GB HBM3) is detected, idle, cool (43C), and ready
  - PyTorch is NOT installed — if you need it, I can install the ROCm build
  - ROCM_PATH and HIP_PATH env vars are not set (optional but recommended)

Want me to install PyTorch with ROCm support or set the remaining env vars?
Back Donate