Flash Pico with UF2 File

Flash Pico with UF2 File | Generated by AI

Home PDF

To flash the RPI_PICO-20250415-v1.25.0.uf2 file to your Raspberry Pi Pico, which is mounted at /media/lzw/RPI-RP2, use the following command:

cp ~/Downloads/RPI_PICO-20250415-v1.25.0.uf2 /media/lzw/RPI-RP2/

cp: Copies the file.
~/Downloads/RPI_PICO-20250415-v1.25.0.uf2: The path to your .uf2 file in the Downloads directory.
/media/lzw/RPI-RP2/: The mount point of the Pico’s RPI-RP2 drive, as shown in your output.

The .uf2 file will be copied to the Pico, and the device will automatically flash the firmware.
The RPI-RP2 drive will unmount (disappear) once the flashing is complete, indicating success.
If the drive reappears, the flash may have failed. Verify the .uf2 file is valid or try a different USB cable/port.

If you encounter issues or need further assistance, let me know!

Back 2025.06.29 Donate