Remurita Reception Chair Assembly Guide | Generated by AI
Question: Provide a guide to construct/assemble this chair from the Walmart product: 2-Pack Reception Chairs, Office Guest Chair with Padded Mesh Back for Conference/Waiting/Meeting Room, Black (item 17400651282).
Answer:
This product is the REMURITA 2-Pack Office Desk Chair No Wheels Mesh Back Padded Computer Chairs (also described as reception/guest chairs). These are sled-base guest chairs with a mesh back, padded seat, fixed arms, and no wheels. Assembly is required but described as simple and straightforward.
General Assembly Guide for This Type of Chair
Specific step-by-step instructions come in the box with the product (included paper manual + all hardware and any needed tools like an Allen wrench/hex key). No official PDF manual was found online for this exact item (Walmart item #17400651282 or REMURITA model). Similar mesh-back sled-base guest/reception chairs from Walmart and other brands typically follow this standard assembly process (usually 4–8 steps, 10–20 minutes per chair):
- Unpack and Check Parts
Lay out all components and hardware. Typical parts include:- Seat cushion (padded)
- Mesh backrest
- Metal sled base/frame (one continuous piece or with separate legs)
- Left and right armrests (if attached separately)
- Bolts/screws (usually 8–12 total), washers
- Any plastic covers or anti-slip pads
Verify nothing is missing or damaged. Tools are usually provided (Allen key/hex wrench).
-
Attach the Seat to the Backrest/Frame
Most often, the backrest is already partially attached to the frame. Align the seat cushion with the mounting points on the frame (usually 4 holes).
Insert bolts from underneath the seat up through the frame, add washers if included, and hand-tighten. - Attach Armrests (if separate)
If the arms are not pre-attached:- Align each armrest with the holes on the side of the seat and back frame.
- Insert the longer bolts through the armrest into the seat/back.
- Tighten partially.
-
Secure All Fasteners
Go back and fully tighten all bolts/screws in a star/cross pattern (like tightening lug nuts) to ensure even pressure and prevent wobbling. Do not overtighten to avoid stripping.
Tip from similar chairs: Attach all screws loosely on one side first, then the other, before final tightening. - Final Checks and Finishing
- Attach any plastic caps or covers over bolt heads.
- Add the anti-slip/rubber pads or blocks to the bottom of the sled base (prevents floor scratching and adds stability).
- Turn the chair upright and test for stability — sit gently and check for wobbling. Retighten if needed.
Tips
- Work on a soft surface (carpet or blanket) to avoid scratching the frame or floor.
- Assembly is usually for one person; no special tools beyond what’s included.
- Estimated time: 10–25 minutes per chair (simple design, few parts).
- The chair supports up to 250 lbs and features a sturdy iron frame.
- If parts are missing or unclear, contact Walmart customer service or the seller (REMURITA via Walmart) with your order number for replacement parts or clarification.
For visual help, search YouTube for “assemble Walmart mesh guest chair” or “sled base reception chair assembly” — many similar models (Mainstays, Costway, etc.) have nearly identical processes.
References:
- Walmart Product Page
- Similar chair assembly examples: YouTube - Mainstays Mesh Back Office Chair Assembly (very close design)