XDR3050 EasyMesh No OpenWrt Support | Generated by AI

Home 2026.02

Question: Can the TP-Link XDR3050 EasyMesh version install OpenWrt?

Answer:

No, the TP-Link TL-XDR3050 (EasyMesh version, often labeled as TL-XDR3050 易展版) does not currently support official OpenWrt installation.

This model is a Wi-Fi 6 (AX3000) router primarily sold in the Chinese market, featuring EasyMesh support for mesh networking. It uses a MediaTek chipset (likely MT7981 or a similar Filogic series component common in TP-Link’s XDR3xxx lineup), but it is not listed in the official OpenWrt Table of Hardware (ToH) as a supported device. Searches across OpenWrt’s wiki, forums, and related resources show no entry for the XDR3050, no official builds, and no confirmed installation guides.

Similar TP-Link models (e.g., XDR6088, XDR4288) with MediaTek Filogic SoCs (like MT7986) have partial or experimental OpenWrt support, often requiring bootloader unlocking or replacement due to locked bootloaders on newer TP-Link devices. However, the XDR3050 lacks even experimental community ports or documented success stories.

Chinese forums (e.g., Right.com.cn/Enshan) have discussions about flashing OpenWrt on similar XDR series routers, but these usually involve hardware modifications like replacing flash memory (e.g., upgrading from 16MB to larger SPI-NAND), custom builds, or UART/serial access for recovery. No reliable, straightforward method exists for the XDR3050 EasyMesh variant without risking bricking the device.

If you are considering OpenWrt for advanced features, custom firmware, or better control:

In summary, as of now, OpenWrt is not installable on the TP-Link XDR3050 EasyMesh version in any official or easy way. If community support emerges in the future, it would likely appear first on OpenWrt forums or Chinese tech sites like acwifi.net.

References:


Back Donate